Skip to content
SKYARC 3250 MX
The SKY ARC ULTRA 3250 MX machine, its one of the most powerful and advanced in the market, allow connectivity 1/3 ph. from 208 and 440V. also includes VRD and AFS. Also allows a secure generator connection a 30% smaller than the traditional inverters and allows up to 150 meters extensions. Without any power loss. Allows to weld rods continuously from 1/4 (6.0 mm) and 5/32 (4.0mm). 6013, 7018, 6010, 6011, SS…
Features
- Makes easier to START the ARC, preheating the rod.
- Improves the ARC STABILITY, and prevents the rod from sticking.
- If the rod sticks, the machine will stop the power, so it can start again easily.
- Facilita el INICIO del ARCO en TIG, sin contaminación del tungsteno.
- Makes easier the start of the Arc in TIG without contaminating the tungsten.
- The ultimate technology by microprocessor to provide you the BEST ARC.
- ULTRA POWER, it’s a technology SWEISS exclusive, allows to connect the machine power source from 95 to 270V. Saves 40% of electric consumption. Allows to use power generators about 30% smaller. More power when plug to 110V.
Included
- Rod Holder set, 3m cable, cu16.- (SWKPE163)
- Earth clamp set, 3m cable, cu16. – (SWKPM163)
| Item | Sweiss® Welder Skyarc 3250 MX |
| Amperage | 10-320Amps |
| Duty cycle at 40°C | 50% |
| Current type | DC |
| Ocv | 50 – 95V (ULTRA ARC) |
| Input voltage | 110 – 560V |
| Frequency | 50 / 60 Hz |
| Max. consumption (220V) | 35A |
| TIG | LIFT ARC |
| Weight | 22 kG |
| Dimensions (mm) | 330 x 140 x 230 |
| IP | IP23S |
| Insulation | F |
| Connection type | 1/2/3 Ph |
| Rods | Ø 1.6 – 6.0 mm. (3/16”) |
| Fast connectors (DINSE) | 35/50 |
| Front/back material | Plastic |
| Casing material | Steel |
| Regulations | Regulations |
| Rod Types | 6013, 7018, 6011, SS… |
| Length | 14'' |
| Width | 6'' |
| Height | 10'' |
| Weight | 51 lbs |
SKYARC 3250 MX
The SKY ARC ULTRA 3250 MX machine, its one of the most powerful and advanced in the market, allow connectivity 1/3 ph. from 208 and 440V. also includes VRD and AFS. Also allows a secure generator connection a 30% smaller than the traditional inverters and allows up to 150 meters extensions. Without any power loss. Allows to weld rods continuously from 1/4 (6.0 mm) and 5/32 (4.0mm). 6013, 7018, 6010, 6011, SS…
Features
- Makes easier to START the ARC, preheating the rod.
- Improves the ARC STABILITY, and prevents the rod from sticking.
- If the rod sticks, the machine will stop the power, so it can start again easily.
- Facilita el INICIO del ARCO en TIG, sin contaminación del tungsteno.
- Makes easier the start of the Arc in TIG without contaminating the tungsten.
- The ultimate technology by microprocessor to provide you the BEST ARC.
- ULTRA POWER, it’s a technology SWEISS exclusive, allows to connect the machine power source from 95 to 270V. Saves 40% of electric consumption. Allows to use power generators about 30% smaller. More power when plug to 110V.
Included
- Rod Holder set, 3m cable, cu16.- (SWKPE163)
- Earth clamp set, 3m cable, cu16. – (SWKPM163)
| Item | Sweiss® Welder Skyarc 3250 MX |
| Amperage | 10-320Amps |
| Duty cycle at 40°C | 50% |
| Current type | DC |
| Ocv | 50 – 95V (ULTRA ARC) |
| Input voltage | 110 – 560V |
| Frequency | 50 / 60 Hz |
| Max. consumption (220V) | 35A |
| TIG | LIFT ARC |
| Weight | 22 kG |
| Dimensions (mm) | 330 x 140 x 230 |
| IP | IP23S |
| Insulation | F |
| Connection type | 1/2/3 Ph |
| Rods | Ø 1.6 – 6.0 mm. (3/16”) |
| Fast connectors (DINSE) | 35/50 |
| Front/back material | Plastic |
| Casing material | Steel |
| Regulations | Regulations |
| Rod Types | 6013, 7018, 6011, SS… |
| Length | 14'' |
| Width | 6'' |
| Height | 10'' |
| Weight | 51 lbs |
BETTER TOGETHER
This item would go well with:
RECENTLY VIEWED
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.