Skip to content
Millermatic® 141 MIG Welder
Miller™ Millermatic™ 141 MIG Welder Machine operates in 120 V input. The welder features robust all-aluminum housing mechanical contractors’ maintenance repair farmers ranchers and education facilities staff applications.
Features
- Auto-Set™: A breakthrough control that automatically sets your welder to the proper parameters
- Auto-Set offers all-in-one MIG minus the hassle of finding parameters. Simply set the wire diameter, set the material thickness, and start welding!
- Angled All Aluminum Drive System: Robust wire drive with Quick Select™ drive roll and calibrated tension knob creates consistent feeding and easy setup for up to 15-foot MIG guns
- Quick Select™ Drive Roll: Makes setup quicker by offering three grooves - two for different size solid wire and a third for flux-cored wire
- Smooth-Start™: This technology provides a smooth, spatter-free start. The best starting machine in the 120V MIG category! No more pop-gun starts or spatter to clean up
- Auto Spool Gun Detect™: Automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch
- Thermal Overload and 'Tip Saver' Short Circuit Protection: Shuts down the unit and activates the over-temperature light if the airflow is blocked or duty cycle is exceeded
- Tip Saver shuts down output when the tip is shorted to the work extending tip life and protecting internal components from damage
Applications
- Light Fabrication
- Maintenance and Repair
- Auto Body
- Farm/Home
Includes
- Power source
- 6. 5' (2 m) power cord with plug
- 10' (3 m), M-100 MIG gun and cable assembly
- 10' (3 m) work cable with clamp
- Argon and AR/CO2 mix flow gauge regulator with gas hose
- Hobart™ spool of . 030" (0. 8 mm) solid wire
- Two contact tips for . 030" (0. 8 mm) wire
- Quick Select™ drive rolls for . 024" (0. 6 mm) or . 030/. 035" (0. 8/0. 9 mm) solid wire, and . 030/. 035" (0. 8/0. 9 mm) flux-cored wire
- Material thickness gauge
PROCESSES
- MIG (GMAW)
- Flux Cored (FCAW)
| Item | MIG Welder |
| Series | Millermatic 141 |
| Input Voltage | 110/115/120V AC |
| Phase | Single-Phase |
| Welding Mode | CV |
| Polarity | DC |
| Welding Processes | Flux-Cored Welding (FCAW), MIG Welding (GMAW) |
| For Wire Type | Flux-Cored, Solid |
| Maximum Wire Diameter | 0.03 in (Solid), 0.035 in (Flux-Cored) |
| Maximum Wire Feed Speed | 360 in/min |
| MIG Welding Output @ Duty Cycle | 40 Amps @ 16 V, 100%, 90 Amps @ 18.5 V, 20% |
| Includes | 10 ft. M-100 MIG Gun, 10 ft. Work Cable with Clamp, Argon and Ar/Co2 Mix Flow Gauge Regulator with Gas Hose, Hobart Spool of 0.030 in. Solid Wire, Quick Select Drive Rolls, Two Contact Tips |
| Weight | 51 lb |
| Application | Customizing, DIY, Farm and Ranch, Home Hobbyist, Manufacturing, Metal Art, Racing, Restoring, Sculptures |
| Color | Blue |
| Features | Overload Protection |
| For Material Type | Mid Steel, Stainless Steel |
| For Maximum Material Thickness | 3/16 in (Mild Steel) |
| For Minimum Material Thickness | 24 ga (Mild Steel) |
| MIG Welding Maximum Output Current | 140 Amps |
| MIG Welding Minimum Output Current | 30 Amps |
| Minimum Wire Diameter | 0.024 in (Solid Steel), 0.024 in (Stainless Steel), 0.03 in (Flux-Cored), 0.6 mm (Solid Steel), 0.6 mm (Stainless Steel), 0.8 mm (Flux-Cored) |
| Minimum Wire Feed Speed | 15 in/min |
| Overall Depth | 11.25 in |
| Overall Height | 12.5 in |
| Overall Width | 20.5 in |
| Plug Type | 5-15P |
| Power Cord Included | Yes |
| Power Cord Length | 6 1/2 ft |
| Standards | CSA Certified |
| Amperage Range | 30 to 140 Amps |
Millermatic® 141 MIG Welder
Miller™ Millermatic™ 141 MIG Welder Machine operates in 120 V input. The welder features robust all-aluminum housing mechanical contractors’ maintenance repair farmers ranchers and education facilities staff applications.
Features
- Auto-Set™: A breakthrough control that automatically sets your welder to the proper parameters
- Auto-Set offers all-in-one MIG minus the hassle of finding parameters. Simply set the wire diameter, set the material thickness, and start welding!
- Angled All Aluminum Drive System: Robust wire drive with Quick Select™ drive roll and calibrated tension knob creates consistent feeding and easy setup for up to 15-foot MIG guns
- Quick Select™ Drive Roll: Makes setup quicker by offering three grooves - two for different size solid wire and a third for flux-cored wire
- Smooth-Start™: This technology provides a smooth, spatter-free start. The best starting machine in the 120V MIG category! No more pop-gun starts or spatter to clean up
- Auto Spool Gun Detect™: Automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch
- Thermal Overload and 'Tip Saver' Short Circuit Protection: Shuts down the unit and activates the over-temperature light if the airflow is blocked or duty cycle is exceeded
- Tip Saver shuts down output when the tip is shorted to the work extending tip life and protecting internal components from damage
Applications
- Light Fabrication
- Maintenance and Repair
- Auto Body
- Farm/Home
Includes
- Power source
- 6. 5' (2 m) power cord with plug
- 10' (3 m), M-100 MIG gun and cable assembly
- 10' (3 m) work cable with clamp
- Argon and AR/CO2 mix flow gauge regulator with gas hose
- Hobart™ spool of . 030" (0. 8 mm) solid wire
- Two contact tips for . 030" (0. 8 mm) wire
- Quick Select™ drive rolls for . 024" (0. 6 mm) or . 030/. 035" (0. 8/0. 9 mm) solid wire, and . 030/. 035" (0. 8/0. 9 mm) flux-cored wire
- Material thickness gauge
PROCESSES
- MIG (GMAW)
- Flux Cored (FCAW)
| Item | MIG Welder |
| Series | Millermatic 141 |
| Input Voltage | 110/115/120V AC |
| Phase | Single-Phase |
| Welding Mode | CV |
| Polarity | DC |
| Welding Processes | Flux-Cored Welding (FCAW), MIG Welding (GMAW) |
| For Wire Type | Flux-Cored, Solid |
| Maximum Wire Diameter | 0.03 in (Solid), 0.035 in (Flux-Cored) |
| Maximum Wire Feed Speed | 360 in/min |
| MIG Welding Output @ Duty Cycle | 40 Amps @ 16 V, 100%, 90 Amps @ 18.5 V, 20% |
| Includes | 10 ft. M-100 MIG Gun, 10 ft. Work Cable with Clamp, Argon and Ar/Co2 Mix Flow Gauge Regulator with Gas Hose, Hobart Spool of 0.030 in. Solid Wire, Quick Select Drive Rolls, Two Contact Tips |
| Weight | 51 lb |
| Application | Customizing, DIY, Farm and Ranch, Home Hobbyist, Manufacturing, Metal Art, Racing, Restoring, Sculptures |
| Color | Blue |
| Features | Overload Protection |
| For Material Type | Mid Steel, Stainless Steel |
| For Maximum Material Thickness | 3/16 in (Mild Steel) |
| For Minimum Material Thickness | 24 ga (Mild Steel) |
| MIG Welding Maximum Output Current | 140 Amps |
| MIG Welding Minimum Output Current | 30 Amps |
| Minimum Wire Diameter | 0.024 in (Solid Steel), 0.024 in (Stainless Steel), 0.03 in (Flux-Cored), 0.6 mm (Solid Steel), 0.6 mm (Stainless Steel), 0.8 mm (Flux-Cored) |
| Minimum Wire Feed Speed | 15 in/min |
| Overall Depth | 11.25 in |
| Overall Height | 12.5 in |
| Overall Width | 20.5 in |
| Plug Type | 5-15P |
| Power Cord Included | Yes |
| Power Cord Length | 6 1/2 ft |
| Standards | CSA Certified |
| Amperage Range | 30 to 140 Amps |
BETTER TOGETHER
This item would go well with:
RECENTLY VIEWED
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.