Simpson Strong-Tie SET-3G™

SIM.SET3G10

$28.95

  • RECOGER EN TIENDA
  • ENTREGA
  • ENVÍO
204 En Stock
Ver Inventario por Tienda
heart

SET-3G is an epoxy-based anchoring adhesive with high design strength and proven performance. SET-3G is a 1:1 ratio, two-component, anchoring adhesive for concrete (cracked and uncracked). SET-3G installs and performs in a variety of environmental conditions 

Features

  • Exceptional performance — superior bond strengths permit ductile solutions in high seismic areas.
  • Design flexibility — improved sustained load performance at elevated temperature.
  • Jobsite versatility — can be specified for all base material conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C).
  • Recognized per ICC ES AC308 for post-installed rebar development and splice length design provisions.
  • Approved for installation with multiple vacuum-drill bit systems without further hole cleaning. See Code Report (ESR-4057) and Engineering Letter for approved systems.
  • Wire brush hole-cleaning system for conventional blow-brush-blow cleaning method for anchoring.
  • With higher bond strengths, ductile solutions can often be achieved with SET-3G in high seismic areas.
  • Low-odor formulation.
  • Manufactured in the USA using global materials.
  • During the installation of SET-3G, when the correct installation processes are followed, there is no performance difference between water-saturated concrete, water-filled holes, or submerged concrete.
  • For use with potable water.

Applications

  • Mass Timber / Cross-Laminated Timber
  • Seismic (New Construction)
  • Water / Wastewater Facilities
  • Concrete — Cracked
  • Seismic Retrofit

NO hay especificaciones disponibles

SET-3G is an epoxy-based anchoring adhesive with high design strength and proven performance. SET-3G is a 1:1 ratio, two-component, anchoring adhesive for concrete (cracked and uncracked). SET-3G installs and performs in a variety of environmental conditions 

Features

  • Exceptional performance — superior bond strengths permit ductile solutions in high seismic areas.
  • Design flexibility — improved sustained load performance at elevated temperature.
  • Jobsite versatility — can be specified for all base material conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C).
  • Recognized per ICC ES AC308 for post-installed rebar development and splice length design provisions.
  • Approved for installation with multiple vacuum-drill bit systems without further hole cleaning. See Code Report (ESR-4057) and Engineering Letter for approved systems.
  • Wire brush hole-cleaning system for conventional blow-brush-blow cleaning method for anchoring.
  • With higher bond strengths, ductile solutions can often be achieved with SET-3G in high seismic areas.
  • Low-odor formulation.
  • Manufactured in the USA using global materials.
  • During the installation of SET-3G, when the correct installation processes are followed, there is no performance difference between water-saturated concrete, water-filled holes, or submerged concrete.
  • For use with potable water.

Applications

  • Mass Timber / Cross-Laminated Timber
  • Seismic (New Construction)
  • Water / Wastewater Facilities
  • Concrete — Cracked
  • Seismic Retrofit

NO hay especificaciones disponibles

MEJOR JUNTOS

Este artículo iría bien con:

Precio de todos los 2 artículos

$63.45

VISTO RECIENTEMENTE