This 3/4 in. Schedule 40 PVC 45° Elbow can withstand a maximum of 289 psi working pressure. It's commonly used in irrigation systems. It is manufactured from type 1 grade 1 PVC for optimum performance.
Features
- Schedule 40 PVC requires a primer before cementing
- Use to make a 45° connection between straight lengths of schedule 40 pipe
- Withstands up to 289 psi working pressure
- Injection molded
- Designed for use in a solvent weld system
- Do not test or use with compressed air or gas, or compressed air or gas systems
Item | PVC Elbow |
Application | Potable Water |
Material | PVC |
Connection | Slip-Joint |
Fitting or Connector | Elbow |
Bend Degree | 45 Degree |
Connectivity | Solvent Cemented |
Double Fitting Size | 3/4" x 3/4" |
Length | 1.34'' |
Width | 1.34'' |
Height | 2.68'' |
Weight | 0.09 lbs |
This 3/4 in. Schedule 40 PVC 45° Elbow can withstand a maximum of 289 psi working pressure. It's commonly used in irrigation systems. It is manufactured from type 1 grade 1 PVC for optimum performance.
Features
- Schedule 40 PVC requires a primer before cementing
- Use to make a 45° connection between straight lengths of schedule 40 pipe
- Withstands up to 289 psi working pressure
- Injection molded
- Designed for use in a solvent weld system
- Do not test or use with compressed air or gas, or compressed air or gas systems
Item | PVC Elbow |
Application | Potable Water |
Material | PVC |
Connection | Slip-Joint |
Fitting or Connector | Elbow |
Bend Degree | 45 Degree |
Connectivity | Solvent Cemented |
Double Fitting Size | 3/4" x 3/4" |
Length | 1.34'' |
Width | 1.34'' |
Height | 2.68'' |
Weight | 0.09 lbs |
BETTER TOGETHER
This item would go well with:
RECENTLY VIEWED
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.