Skip to content
Maxstar® 161 STL 120-240 V
Best of class - Provides maximum portability and performance in the most compact TIG/Stick packages in the industry. Dependability and performance all in one machine.
Features
- Use on 120 AND 240 Volt Input Power - Separate 120 and 240 volt power cords disconnect from the rear panel of the machine without the use of any tools to allow your to common 120 and 240 volt power receptacles.
- Compact Design Allows for Great Portability - Weighing in at 13 lbs. and featuring a convenient handle/shoulder strap, this little inverter-based TIG/Stick machine can be taken from location to location.
- Low Power Draw - By utilizing an inverter-based power source in the Maxstar® 161, superior arc starts and excellent weld puddle control are provided in both the TIG and Stick settings - all in a small, light-weight package.
- Easy-to-Use
- Turn power on.
- Select process: Lift-Arc TIG, Stick, or 6010 Stick.
- Set amperage.
Then weld! It’s as easy as 1, 2, 3.
- 6010 Stick Electrode Capability - Superior Stick arc performance even on the difficult-to-run electrodes like E6010.
- No More "Sticky" Electrodes - With Miller's Adaptive Hot Start™ technology, you no longer have to worry about those difficult-to-strike electrodes.
- Conserve Your Electrodes - With the Stick-Stuck feature the machine detects if the electrode is stuck to the part and turns the welding output off to safely and easily remove the electrode.
- No Need For A Gas Valve On Your TIG Torch - With a built-in gas solenoid, the Maxstar® 161 eliminates the need for a bulky TIG torch with a gas valve
- 5 Amp TIG Capability - Allows users to weld thinner materials than other machines in this category.
INCLUDED
- Maxstar® 161 STL
- 6.5 ft. (2 m.) primary cords for 120 V and 240 V
- 13 ft. (4 m.) stick electrode holder with 25 mm. Dinse-style connector
- 10 ft. (3 m.) work clamp with 25 mm. Dinse-stlye connector
- Adjustable handle/shoulder strap
- Quick Reference Guide
PROCESSES
- Stick (SMAW)
- TIG (GTAW)
- TIG DC (GTAW-DC)
Applications
- Process pipe
- Dairy industry
- Food/beverage industry
- Restaurant/kitchen repair
- Experimental aircraft
- Shipboard installation/repair
- Maintenance repair
| Item | TIG Welder |
| For Material Type | Stainless Steel, Steel |
| For Maximum Material Thickness | 3/16 in (Steel) |
| For Minimum Material Thickness | 0.020 in (Steel) |
| Input Frequency | 50/60 Hz |
| Max. Input Current | 23.16 Amps @ 120V (Single-Phase) |
| Phase | Single-Phase |
| Polarity | DC |
| Series | Maxstar 161 STL |
| Stick Welding Maximum Output Current | 160 Amps |
| Stick Welding Minimum Output Current | 20 Amps |
| Stick Welding Output @ Duty Cycle | 110 Amps @ 24.4 VDC, 100%, 160 Amps @ 26.4 VDC, 20%, 60 Amps @ 22.4 VDC, 100%, 90 Amps @ 23.6 VDC, 30% |
| TIG Welding Maximum Output Current | 160 Amps |
| TIG Welding Minimum Output Current | 5 Amps |
| TIG Welding Output @ Duty Cycle | 110 Amps @ 14.4 VDC, 100%, 130 Amps @ 15.2 VDC, 30%, 160 Amps @ 16.4 VDC, 20%, 90 Amps @ 13.6 VDC, 100% |
| Welding Processes | Stick Welding (SMAW), TIG Welding (GTAW) |
| Amperage Range | 5 Amps to 160 Amps |
| Application | Aerospace, Aluminum Ship Repair, Anodized Aluminum Fabrication, Heavy Fabrication, Pipe and Tube Fabrication, Precision Fabrication |
| Color | Blue |
| Features | Auto Line Power Management Technology, Fan-On-Demand(TM), Hot Start(TM), Single Amperage Range, Thermal Overload Protection |
| Includes | 10 ft (3 m) work clamp with 25 mm Dinse-style connector, 12.5 ft (3.8 m) Weldcraft A-150 TIG torch, 13 ft (4 m) stick electrode holder with 25 mm Dinse-style connector, AK2C accessory kit, Protective Miller(R) X-Case (301429), Regulator/flow gauge and gas hose |
| Imput Voltage | 110/115/120V AC, 220/230/240V AC |
| Model | 907710001 |
| Open Circuit Voltage | 48V DC |
| Overall Depth | 13.5 in |
| Overall Height | 10.3 in |
| Overall Width | 5.61 in |
| Plug Type | 5-15P |
| Power Cord Included | Yes |
| Power Cord Length | 6 1/2 ft |
| Remote Control | Remote Control Not Included |
| Remote Connection Type | 6-Pin (Miller) |
| Standards | CSA, ISO |
| TIG Arc Start Feature | Lift Arc Start |
| Weight | 13 lb |
| Welding Mode | CC |
Maxstar® 161 STL 120-240 V
Best of class - Provides maximum portability and performance in the most compact TIG/Stick packages in the industry. Dependability and performance all in one machine.
Features
- Use on 120 AND 240 Volt Input Power - Separate 120 and 240 volt power cords disconnect from the rear panel of the machine without the use of any tools to allow your to common 120 and 240 volt power receptacles.
- Compact Design Allows for Great Portability - Weighing in at 13 lbs. and featuring a convenient handle/shoulder strap, this little inverter-based TIG/Stick machine can be taken from location to location.
- Low Power Draw - By utilizing an inverter-based power source in the Maxstar® 161, superior arc starts and excellent weld puddle control are provided in both the TIG and Stick settings - all in a small, light-weight package.
- Easy-to-Use
- Turn power on.
- Select process: Lift-Arc TIG, Stick, or 6010 Stick.
- Set amperage.
Then weld! It’s as easy as 1, 2, 3.
- 6010 Stick Electrode Capability - Superior Stick arc performance even on the difficult-to-run electrodes like E6010.
- No More "Sticky" Electrodes - With Miller's Adaptive Hot Start™ technology, you no longer have to worry about those difficult-to-strike electrodes.
- Conserve Your Electrodes - With the Stick-Stuck feature the machine detects if the electrode is stuck to the part and turns the welding output off to safely and easily remove the electrode.
- No Need For A Gas Valve On Your TIG Torch - With a built-in gas solenoid, the Maxstar® 161 eliminates the need for a bulky TIG torch with a gas valve
- 5 Amp TIG Capability - Allows users to weld thinner materials than other machines in this category.
INCLUDED
- Maxstar® 161 STL
- 6.5 ft. (2 m.) primary cords for 120 V and 240 V
- 13 ft. (4 m.) stick electrode holder with 25 mm. Dinse-style connector
- 10 ft. (3 m.) work clamp with 25 mm. Dinse-stlye connector
- Adjustable handle/shoulder strap
- Quick Reference Guide
PROCESSES
- Stick (SMAW)
- TIG (GTAW)
- TIG DC (GTAW-DC)
Applications
- Process pipe
- Dairy industry
- Food/beverage industry
- Restaurant/kitchen repair
- Experimental aircraft
- Shipboard installation/repair
- Maintenance repair
| Item | TIG Welder |
| For Material Type | Stainless Steel, Steel |
| For Maximum Material Thickness | 3/16 in (Steel) |
| For Minimum Material Thickness | 0.020 in (Steel) |
| Input Frequency | 50/60 Hz |
| Max. Input Current | 23.16 Amps @ 120V (Single-Phase) |
| Phase | Single-Phase |
| Polarity | DC |
| Series | Maxstar 161 STL |
| Stick Welding Maximum Output Current | 160 Amps |
| Stick Welding Minimum Output Current | 20 Amps |
| Stick Welding Output @ Duty Cycle | 110 Amps @ 24.4 VDC, 100%, 160 Amps @ 26.4 VDC, 20%, 60 Amps @ 22.4 VDC, 100%, 90 Amps @ 23.6 VDC, 30% |
| TIG Welding Maximum Output Current | 160 Amps |
| TIG Welding Minimum Output Current | 5 Amps |
| TIG Welding Output @ Duty Cycle | 110 Amps @ 14.4 VDC, 100%, 130 Amps @ 15.2 VDC, 30%, 160 Amps @ 16.4 VDC, 20%, 90 Amps @ 13.6 VDC, 100% |
| Welding Processes | Stick Welding (SMAW), TIG Welding (GTAW) |
| Amperage Range | 5 Amps to 160 Amps |
| Application | Aerospace, Aluminum Ship Repair, Anodized Aluminum Fabrication, Heavy Fabrication, Pipe and Tube Fabrication, Precision Fabrication |
| Color | Blue |
| Features | Auto Line Power Management Technology, Fan-On-Demand(TM), Hot Start(TM), Single Amperage Range, Thermal Overload Protection |
| Includes | 10 ft (3 m) work clamp with 25 mm Dinse-style connector, 12.5 ft (3.8 m) Weldcraft A-150 TIG torch, 13 ft (4 m) stick electrode holder with 25 mm Dinse-style connector, AK2C accessory kit, Protective Miller(R) X-Case (301429), Regulator/flow gauge and gas hose |
| Imput Voltage | 110/115/120V AC, 220/230/240V AC |
| Model | 907710001 |
| Open Circuit Voltage | 48V DC |
| Overall Depth | 13.5 in |
| Overall Height | 10.3 in |
| Overall Width | 5.61 in |
| Plug Type | 5-15P |
| Power Cord Included | Yes |
| Power Cord Length | 6 1/2 ft |
| Remote Control | Remote Control Not Included |
| Remote Connection Type | 6-Pin (Miller) |
| Standards | CSA, ISO |
| TIG Arc Start Feature | Lift Arc Start |
| Weight | 13 lb |
| Welding Mode | CC |
BETTER TOGETHER
This item would go well with:
RECENTLY VIEWED
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.