Skip to content
Ranger® 250 GXT Engine Driven Welder (Kohler®) (w/Electric Fuel Pump)
Classic welder/generator with great welding performance for AC or DC stick and DC wire welding.
EXTRA POWER, EXTRA PERFORMANCE
Get all of the XTras needed for construction and maintenance work. That's XTra welding performance with 250 amps for AC or DC stick and DC wire welding and XTra power with up to 11,000 watts peak for lights, grinders or high amperage equipment. You also get XTra protection and quiet operation with the Lincoln enclosed case.
Features
-
Totally Enclosed Case
- Engine is fully protected.
- 3 service access doors.
- Low Noise - 76.4 dBA sound level at 23 ft. (7 m). 100.7 dB sound power (Lwa) at rated output.
- Choose from painted, camo wrapped, or stainless steel roof, case sides and engine doors.
-
Versatile AC/DC Welding
- AC/DC welding output for a broad range of stick electrode types.
- Excellent AC TIG welding with optional TIG Module and either a foot or hand Amptrol™ for aluminum and other alloy welding.
- MIG and Flux-Cored capable (with optional equipment).
- Remote ready! 6-pin connector and local/remote switch for remote control operation.
-
11,000 Watts Peak Single-Phase AC Generator Power
- 10,000 watts continuous power for generator output, plasma cutter or inverter welder.
- Power-up lights, grinder, and power tools.
-
23 HP Kohler® Gasoline Engine
- 2 cylinder, 4 cycle overhead valve air-cooled design.
- Electric fuel pump avoids vapor lock.
- Oil drain extension for easy oil changes.
- 12 gallon tank for extended run times.
- Electric fuel gauge located on control panel makes it easy to check the fuel level during operation and refueling.
- Rugged Reliability
- Welding and AC Generator Outputs Rated at 104 °F
Processes
- Stick (SMAW)
- TIG (GTAW)
- MIG (GMAW)
- Flux-Cored Self-Shielded (FCAW-SS)
- Flux-Cored Gas-Shielded (FCAW-G)
Application
- Construction
- Construction & Field Erection
- General Fabrication
- Maintenance & Repair
- Repair Welding
- Structural Fabrication
- Structural Welding
Included
- Machine Only
| Item | Engine-Driven Welder |
| Color | Red |
| Generator Fuel Type | Gasoline |
| MIG Welding Maximum Output Current | 250 Amps |
| MIG Welding Minimum Output Current | 50 Amps |
| MIG Welding Output @ Duty Cycle | 250 Amps @ 25 V, 100% |
| Phase | Single-Phase |
| Polarity | AC / DC |
| Start Type | Electric |
| Stick Welding Maximum Output Current | 250 Amps |
| Stick Welding Minimum Output Current | 50 Amps |
| Stick Welding Output @ Duty Cycle | 250 Amps @ 25 V, 100% |
| TIG Welding Maximum Output Current | 250 Amps |
| TIG Welding Minimum Output Current | 50 Amps |
| TIG Welding Output @ Duty Cycle | 250 Amps @ 25 V, 100% |
| Remote Connection Type | 6-Pin (Lincoln) |
| Welding Mode | CC/CV |
| Welding Processes | Air Carbon Arc Cutting, Gouging (CAC-A), Flux-Cored Welding (FCAW), MIG Welding (GMAW), Stick Welding (SMAW), TIG Welding (GTAW |
| Application | Used In Construction, Maintenance And Repair, Ranch/Farm Applications |
| Circuit Breaker | Yes |
| Continuous Auxiliary Power | 10,000 W |
| Engine Brand | Kohler |
| Engine Displacement | 44 cu in |
| Engine Model | Kohler CH730 |
| Fuel Tank Capacity | 12 gal |
| Generator Outlets | 20 Amps 120V 5-20R (4), 50 Amps 120/240V 14-50R |
| Horsepower | 23 hp |
| Includes | Ranger 250 GXT Welder/ Generator |
| Oil Capacity | 2qt |
| Open Circuit Voltage | 80 V |
| Overall Depth | 42.3 in |
| Overall Height | 29.91 in |
| Overall Width | 21.5 in |
| Peak Auxiliary Power | 11,000 W |
| Series | Ranger 250 GXT |
| Sound Level | 76.4 dBA @ 23 ft |
| Standards | CSA Certified, ISO 9001 |
| Weight | 602 lb |
Ranger® 250 GXT Engine Driven Welder (Kohler®) (w/Electric Fuel Pump)
Classic welder/generator with great welding performance for AC or DC stick and DC wire welding.
EXTRA POWER, EXTRA PERFORMANCE
Get all of the XTras needed for construction and maintenance work. That's XTra welding performance with 250 amps for AC or DC stick and DC wire welding and XTra power with up to 11,000 watts peak for lights, grinders or high amperage equipment. You also get XTra protection and quiet operation with the Lincoln enclosed case.
Features
-
Totally Enclosed Case
- Engine is fully protected.
- 3 service access doors.
- Low Noise - 76.4 dBA sound level at 23 ft. (7 m). 100.7 dB sound power (Lwa) at rated output.
- Choose from painted, camo wrapped, or stainless steel roof, case sides and engine doors.
-
Versatile AC/DC Welding
- AC/DC welding output for a broad range of stick electrode types.
- Excellent AC TIG welding with optional TIG Module and either a foot or hand Amptrol™ for aluminum and other alloy welding.
- MIG and Flux-Cored capable (with optional equipment).
- Remote ready! 6-pin connector and local/remote switch for remote control operation.
-
11,000 Watts Peak Single-Phase AC Generator Power
- 10,000 watts continuous power for generator output, plasma cutter or inverter welder.
- Power-up lights, grinder, and power tools.
-
23 HP Kohler® Gasoline Engine
- 2 cylinder, 4 cycle overhead valve air-cooled design.
- Electric fuel pump avoids vapor lock.
- Oil drain extension for easy oil changes.
- 12 gallon tank for extended run times.
- Electric fuel gauge located on control panel makes it easy to check the fuel level during operation and refueling.
- Rugged Reliability
- Welding and AC Generator Outputs Rated at 104 °F
Processes
- Stick (SMAW)
- TIG (GTAW)
- MIG (GMAW)
- Flux-Cored Self-Shielded (FCAW-SS)
- Flux-Cored Gas-Shielded (FCAW-G)
Application
- Construction
- Construction & Field Erection
- General Fabrication
- Maintenance & Repair
- Repair Welding
- Structural Fabrication
- Structural Welding
Included
- Machine Only
| Item | Engine-Driven Welder |
| Color | Red |
| Generator Fuel Type | Gasoline |
| MIG Welding Maximum Output Current | 250 Amps |
| MIG Welding Minimum Output Current | 50 Amps |
| MIG Welding Output @ Duty Cycle | 250 Amps @ 25 V, 100% |
| Phase | Single-Phase |
| Polarity | AC / DC |
| Start Type | Electric |
| Stick Welding Maximum Output Current | 250 Amps |
| Stick Welding Minimum Output Current | 50 Amps |
| Stick Welding Output @ Duty Cycle | 250 Amps @ 25 V, 100% |
| TIG Welding Maximum Output Current | 250 Amps |
| TIG Welding Minimum Output Current | 50 Amps |
| TIG Welding Output @ Duty Cycle | 250 Amps @ 25 V, 100% |
| Remote Connection Type | 6-Pin (Lincoln) |
| Welding Mode | CC/CV |
| Welding Processes | Air Carbon Arc Cutting, Gouging (CAC-A), Flux-Cored Welding (FCAW), MIG Welding (GMAW), Stick Welding (SMAW), TIG Welding (GTAW |
| Application | Used In Construction, Maintenance And Repair, Ranch/Farm Applications |
| Circuit Breaker | Yes |
| Continuous Auxiliary Power | 10,000 W |
| Engine Brand | Kohler |
| Engine Displacement | 44 cu in |
| Engine Model | Kohler CH730 |
| Fuel Tank Capacity | 12 gal |
| Generator Outlets | 20 Amps 120V 5-20R (4), 50 Amps 120/240V 14-50R |
| Horsepower | 23 hp |
| Includes | Ranger 250 GXT Welder/ Generator |
| Oil Capacity | 2qt |
| Open Circuit Voltage | 80 V |
| Overall Depth | 42.3 in |
| Overall Height | 29.91 in |
| Overall Width | 21.5 in |
| Peak Auxiliary Power | 11,000 W |
| Series | Ranger 250 GXT |
| Sound Level | 76.4 dBA @ 23 ft |
| Standards | CSA Certified, ISO 9001 |
| Weight | 602 lb |
BETTER TOGETHER
This item would go well with:
RECENTLY VIEWED
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.