Skip to content
Hougen® 2'' Pilot Pin for 5/8'' to 2-3/8'' cutter.
The pilot serves three functions when used with ''12,000-series'' cutters in a portable magnetic drill.
- Locate the holes center point.
- Initiate coolant flow to the center of the tool
- Eject the slug at the end of the cut.
- Always use a sharp pilot for best results.
| Item | Pilot Pin |
| Series | 12,000 |
| For use with cutter | 5/8" - 2-3/8" & 16 - 52mm |
| Material Thickness | 2'' |
Hougen® 2'' Pilot Pin for 5/8'' to 2-3/8'' cutter.
The pilot serves three functions when used with ''12,000-series'' cutters in a portable magnetic drill.
- Locate the holes center point.
- Initiate coolant flow to the center of the tool
- Eject the slug at the end of the cut.
- Always use a sharp pilot for best results.
| Item | Pilot Pin |
| Series | 12,000 |
| For use with cutter | 5/8" - 2-3/8" & 16 - 52mm |
| Material Thickness | 2'' |
BETTER TOGETHER
This item would go well with:
RECENTLY VIEWED
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.