Ir directamente al contenido
SKYARC 2650 FX
Maximum power 1ph
An equipment design to give the best results in a daily use, connectivity excelling, may be connected in any power source from 95 to 270V. Also allows a secure generator connection a 30% smaller than the traditional inverters and allows up to 150 meters extensions. Without any power loss. Great welding quality in every type of rods, 6013, 7018,6010, 6011, SS.
Feature
- Makes easier to START the ARC, preheating the rod.
- Improves the ARC STABILITY, and prevents the rod from sticking.
- If the rod sticks, the machine will stop the power, so it can start again easily.
- Makes easier the start of the Arc in TIG without contaminating the tungsten.
- The ultimate technology by microprocessor to provide you the BEST ARC.
- ULTRA POWER, it’s a technology SWEISS exclusive, allows to connect the machine power source from 95 to 270V. Saves 40% of electric consumption. Allows to use power generators about 30% smaller. More power when plug to 110V.
Included
- Rod Holder set, 3m cable cu16 – (SWKPE163)
- Earth clamp set, 3m cable cu16 – (SWKPM162)
| Tema | Sweiss® Welder SKYARC 2650 FX |
| Amperaje | 5 – 200A |
| Ciclo de deber a 40°C | 50% |
| Tipo actual | DC |
| Ocv | 50 – 95V (ULTRA ARC) |
| Tensión de entrada | 110 / 220V (1 Ph) 95 – 270V |
| Frecuencia | 50 / 60 Hz |
| Consumo máximo (110/220V) | 30A – 40A |
| TIG | LIFT ARC |
| Peso | 10 kG |
| Dimensiones (mm) | 425 x 165 x 295 |
| IP | IP23S |
| Aislamiento | F |
| Tipo de conexión | 1 Ph |
| Rodes | Ø 1.6 – 5.0 mm. (3/16”) |
| Conectores rápidos (DINSE) | 35/50 |
| Material frontal/back | Plástico |
| Material de colocación | Acero |
| Reglamento | CE, EN-60974-1, EN-60974-10 |
| Tipos de varilla | 6013, 7018, 6011, SS... |
| Sweiss Code | SWA2650 |
SKYARC 2650 FX
Maximum power 1ph
An equipment design to give the best results in a daily use, connectivity excelling, may be connected in any power source from 95 to 270V. Also allows a secure generator connection a 30% smaller than the traditional inverters and allows up to 150 meters extensions. Without any power loss. Great welding quality in every type of rods, 6013, 7018,6010, 6011, SS.
Feature
- Makes easier to START the ARC, preheating the rod.
- Improves the ARC STABILITY, and prevents the rod from sticking.
- If the rod sticks, the machine will stop the power, so it can start again easily.
- Makes easier the start of the Arc in TIG without contaminating the tungsten.
- The ultimate technology by microprocessor to provide you the BEST ARC.
- ULTRA POWER, it’s a technology SWEISS exclusive, allows to connect the machine power source from 95 to 270V. Saves 40% of electric consumption. Allows to use power generators about 30% smaller. More power when plug to 110V.
Included
- Rod Holder set, 3m cable cu16 – (SWKPE163)
- Earth clamp set, 3m cable cu16 – (SWKPM162)
| Tema | Sweiss® Welder SKYARC 2650 FX |
| Amperaje | 5 – 200A |
| Ciclo de deber a 40°C | 50% |
| Tipo actual | DC |
| Ocv | 50 – 95V (ULTRA ARC) |
| Tensión de entrada | 110 / 220V (1 Ph) 95 – 270V |
| Frecuencia | 50 / 60 Hz |
| Consumo máximo (110/220V) | 30A – 40A |
| TIG | LIFT ARC |
| Peso | 10 kG |
| Dimensiones (mm) | 425 x 165 x 295 |
| IP | IP23S |
| Aislamiento | F |
| Tipo de conexión | 1 Ph |
| Rodes | Ø 1.6 – 5.0 mm. (3/16”) |
| Conectores rápidos (DINSE) | 35/50 |
| Material frontal/back | Plástico |
| Material de colocación | Acero |
| Reglamento | CE, EN-60974-1, EN-60974-10 |
| Tipos de varilla | 6013, 7018, 6011, SS... |
| Sweiss Code | SWA2650 |
MEJOR JUNTOS
Este artículo iría bien con:
VISTO RECIENTEMENTE
- Al seleccionar una opción se actualiza toda la página.
- Presiona la tecla de espacio y luego las teclas de flecha para seleccionar una opción.