Skip to content
The Tomahawk 30 AIR plasma cutter cuts mild and stainless steel precisely and can be used with either external or internal compressor.
PLASMA CUTTING WITH BUILT-IN AIR
The Tomahawk® 30 Air plasma cutting system arrives ready to go for fast and precise cutting. With its built-in air compressor, this machine is perfect for anyone who needs a reliable, portable cutting tool. With the Tomahawk 30 Air, forget the grinder – simply pick up the torch and cut in seconds. Plus, it also has external air capabilities, so you can use it with an external compressor if you need to. So whether you’re working in your garage or out in the field, the Tomahawk 30 Air is the perfect tool for the job.
Features
- Ultimate Portability – Internal air compressor enables operation in environments where external compressed air is not available.
- Continuous Output Control – Focus the arc for different material thickness.
- Touch Start System – Reliable plasma arc initiation without high frequency.
- Rapid Arc Restrike – Fast cutting through gaps, even expanded metal.
- Front Panel Purge Control – Makes it easy to set the airflow rate without initiating the plasma arc.
- Cool Operation, Long Consumable Life - Enhanced swirling airflow keeps the electrode and tip cool and increases the life of consumables.
- Added Safety – Our Parts-in-Place system detects correct installation of consumables and torch.
- Engine Drive Compatible – Select a Lincoln Electric recommended engine driven welder / generator to power your Tomahawk in remote locations.
Included
- (1) Tomahawk 30 AIR Plasma Cutter
- (1) Internal Air Compressor (External Air Connection also Standard)
- (1) K5537-1 LC30 Hand Torch and 10 ft (3 m) Cable
- (3) KP2842-1 Electrode
- (3) KP2842-6 Nozzle 30A
- (2) KP2842-4 Swirl Ring
- (1) KP2842-3 Retaining Cap (Internal Air-2 Holes)
- (1) KP2842-5 Drag Spacer
- (1) KP2842-7 Retaining Cap (Internal Air- 6 Holes)
- (1) Air Regulator and Pressure Gauge
- (1) Internal Water Separator
- (1) Work Clamp and Cable
- (1) Shoulder Strap
- (1) Input Power Cord
| Phase 1: Input Voltage #1 (voltage/Phase/Hertz) | 230/1/60 |
| Phase 1: Rated Output #1A (Current/Voltage/Duty Cycle) | 25 Amps / 90V / 100% |
| Phase 1: Rated Output #1B (Current/Voltage/Duty Cycle) | 30Amps / 92V / 60% |
| Phase 1: Input Current at Max Rated Output #1 (Current) | 16 Amps |
| Dimensions (H x W x D) | 15.2'' x 8.5'' x 18.9'' |
| Weight | 40 lbs |
| Machine Processes | Plasma Cutting |
| Max Rating | 30 Amps |
| Plasma Machine Process | Cutting |
| Torch Included | Yes |
| Gas Supply | Air or Nitrogen |
| Gas Pressure Required | 80 - 110 psi |
| Recommended Cutting Capacity (Mild Steel) (In/ft) | 5/16 in. @22 ipm |
| Recommended Cutting Capacity (Mild Steel) (mm/M) | 7.9 mm. @ .56 m/min |
| Maximum Cutting Thickness (Mild Steel) (ln/Ft) | 3/8 in. @ 14 ipm |
| Maximum Cutting Thickness (Mild Steel) (mm/M) | 9.5 mm. @ .36 m/min |
| Maximum Severance (Mild Steel) (In/Ft) | 1/2 in. @ 5 ipm |
| Maximum Severance (Mild Steel) (mm/M) | 12.7 mm. @ .13 m/min |
| Output Range | 15-30Amps |
| Typical Application | Construction Automotive Brewery Construction & Field Erection General Fabrication Maintenance & Repair Marine Fabrication & Repair |
| Warranty | 3 Years on Machine, 1 Year on the Torch |
The Tomahawk 30 AIR plasma cutter cuts mild and stainless steel precisely and can be used with either external or internal compressor.
PLASMA CUTTING WITH BUILT-IN AIR
The Tomahawk® 30 Air plasma cutting system arrives ready to go for fast and precise cutting. With its built-in air compressor, this machine is perfect for anyone who needs a reliable, portable cutting tool. With the Tomahawk 30 Air, forget the grinder – simply pick up the torch and cut in seconds. Plus, it also has external air capabilities, so you can use it with an external compressor if you need to. So whether you’re working in your garage or out in the field, the Tomahawk 30 Air is the perfect tool for the job.
Features
- Ultimate Portability – Internal air compressor enables operation in environments where external compressed air is not available.
- Continuous Output Control – Focus the arc for different material thickness.
- Touch Start System – Reliable plasma arc initiation without high frequency.
- Rapid Arc Restrike – Fast cutting through gaps, even expanded metal.
- Front Panel Purge Control – Makes it easy to set the airflow rate without initiating the plasma arc.
- Cool Operation, Long Consumable Life - Enhanced swirling airflow keeps the electrode and tip cool and increases the life of consumables.
- Added Safety – Our Parts-in-Place system detects correct installation of consumables and torch.
- Engine Drive Compatible – Select a Lincoln Electric recommended engine driven welder / generator to power your Tomahawk in remote locations.
Included
- (1) Tomahawk 30 AIR Plasma Cutter
- (1) Internal Air Compressor (External Air Connection also Standard)
- (1) K5537-1 LC30 Hand Torch and 10 ft (3 m) Cable
- (3) KP2842-1 Electrode
- (3) KP2842-6 Nozzle 30A
- (2) KP2842-4 Swirl Ring
- (1) KP2842-3 Retaining Cap (Internal Air-2 Holes)
- (1) KP2842-5 Drag Spacer
- (1) KP2842-7 Retaining Cap (Internal Air- 6 Holes)
- (1) Air Regulator and Pressure Gauge
- (1) Internal Water Separator
- (1) Work Clamp and Cable
- (1) Shoulder Strap
- (1) Input Power Cord
| Phase 1: Input Voltage #1 (voltage/Phase/Hertz) | 230/1/60 |
| Phase 1: Rated Output #1A (Current/Voltage/Duty Cycle) | 25 Amps / 90V / 100% |
| Phase 1: Rated Output #1B (Current/Voltage/Duty Cycle) | 30Amps / 92V / 60% |
| Phase 1: Input Current at Max Rated Output #1 (Current) | 16 Amps |
| Dimensions (H x W x D) | 15.2'' x 8.5'' x 18.9'' |
| Weight | 40 lbs |
| Machine Processes | Plasma Cutting |
| Max Rating | 30 Amps |
| Plasma Machine Process | Cutting |
| Torch Included | Yes |
| Gas Supply | Air or Nitrogen |
| Gas Pressure Required | 80 - 110 psi |
| Recommended Cutting Capacity (Mild Steel) (In/ft) | 5/16 in. @22 ipm |
| Recommended Cutting Capacity (Mild Steel) (mm/M) | 7.9 mm. @ .56 m/min |
| Maximum Cutting Thickness (Mild Steel) (ln/Ft) | 3/8 in. @ 14 ipm |
| Maximum Cutting Thickness (Mild Steel) (mm/M) | 9.5 mm. @ .36 m/min |
| Maximum Severance (Mild Steel) (In/Ft) | 1/2 in. @ 5 ipm |
| Maximum Severance (Mild Steel) (mm/M) | 12.7 mm. @ .13 m/min |
| Output Range | 15-30Amps |
| Typical Application | Construction Automotive Brewery Construction & Field Erection General Fabrication Maintenance & Repair Marine Fabrication & Repair |
| Warranty | 3 Years on Machine, 1 Year on the Torch |
RECENTLY VIEWED
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.