![Furius Plasma Cutter Flame 401](http://store.steelandpipes.com/cdn/shop/files/Furius_FW401_13_100x.jpg?v=1715781232)
![Furius Plasma Cutter Flame 401](http://store.steelandpipes.com/cdn/shop/files/Furius_FW401_7_100x.jpg?v=1715781232)
![Furius Plasma Cutter Flame 401](http://store.steelandpipes.com/cdn/shop/files/Furius_FW401_11_100x.jpg?v=1715781232)
![Furius Plasma Cutter Flame 401](http://store.steelandpipes.com/cdn/shop/files/Furius_FW401_Accesorio1_100x.jpg?v=1715781232)
![Furius Plasma Cutter Flame 401](http://store.steelandpipes.com/cdn/shop/files/Furius_FW401_13_800x.jpg?v=1715781232)
![Furius Plasma Cutter Flame 401](http://store.steelandpipes.com/cdn/shop/files/Furius_FW401_7_800x.jpg?v=1715781232)
![Furius Plasma Cutter Flame 401](http://store.steelandpipes.com/cdn/shop/files/Furius_FW401_11_800x.jpg?v=1715781232)
![Furius Plasma Cutter Flame 401](http://store.steelandpipes.com/cdn/shop/files/Furius_FW401_Accesorio1_800x.jpg?v=1715781232)
Inverter plasma cutter up to 1/2" (13mm) 45A 110/220V Cycle 50%. FLAME 401
Special equipment for light work: Ornamentation, maintenance of small and medium-sized businesses and all types of occasional work.; Cuts any electrically conductive metal up to approximately 1/2” (13mm) thick; Can cut: carbon steel, stainless steel, aluminum, copper, bronze and other metals.
Features
- Compressed air regulation knob.
- Amperage adjustment potentiometer.
- Pressure Gauge.
- LED indicators of equipment conditions during work
- High productivity
- Low energy consumption
- High frequency start
- Recommended pressure 60-80 PSI
- Required flow rate 6.5 CFM.
Included
- Ground clamp and torch for plasma cutting (FWA4011).
Regulation Range | 15Amps - 45Amps |
Standards | NXM-J-038-1-ANCE-2016 |
Protection Grade | IP21S |
Duty Cicle | 50% |
Weight | 17.19 lbs |
Electrical consumption | 110V-30Amps/ 220V-30.7Amps |
No-load Voltage | 400V |
Insulation | F |
Frequency | 50- 60Hz |
Inverter plasma cutter up to 1/2" (13mm) 45A 110/220V Cycle 50%. FLAME 401
Special equipment for light work: Ornamentation, maintenance of small and medium-sized businesses and all types of occasional work.; Cuts any electrically conductive metal up to approximately 1/2” (13mm) thick; Can cut: carbon steel, stainless steel, aluminum, copper, bronze and other metals.
Features
- Compressed air regulation knob.
- Amperage adjustment potentiometer.
- Pressure Gauge.
- LED indicators of equipment conditions during work
- High productivity
- Low energy consumption
- High frequency start
- Recommended pressure 60-80 PSI
- Required flow rate 6.5 CFM.
Included
- Ground clamp and torch for plasma cutting (FWA4011).
Regulation Range | 15Amps - 45Amps |
Standards | NXM-J-038-1-ANCE-2016 |
Protection Grade | IP21S |
Duty Cicle | 50% |
Weight | 17.19 lbs |
Electrical consumption | 110V-30Amps/ 220V-30.7Amps |
No-load Voltage | 400V |
Insulation | F |
Frequency | 50- 60Hz |
RECENTLY VIEWED
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.