Ir directamente al contenido
Handler® 125 MIG Welder
A reliable, portable wire feed welder that’s perfect for a variety of projects. Runs on 120V input power, welds up to 3/16 in. mild steel, and is MIG capable with a built-in gas valve.
Features
- Four output voltage settings - Four voltage ranges allow you to adjust the arc for different thicknesses.
- Factory-installed gas solenoid - Easy for you to change from flux-cored wire to MIG welding.
- Built-in contactor - Keeps wire electrically "cold" until trigger is pulled which gives you ease of use.
- Durable feed head with quick-release drive roll tension lever - Positive feed with adjustable tension gives you easy access to thread new wire.
- Spool hub assembly accommodates 4- or 8- inch spools - Offers you flexibility to use small or large spools of wire to better suit your welding needs.
- Self- resetting thermal overload protection - Protects power transformer from thermal overload to provide you maximum reliability.
- Broad output range of 25 – 130 Amps. - Allows you to weld up to 1/8 in. steel with flux-cored wire.
Includes
- Comfortable 8 ft. (2.4 m) H-9D gun with liner for .030-.035 in. (0.8 -0.9 mm) diameter wire.
- Work cable with clamp
- (2) - 0.030 (0.8 mm) contact tips
- Power cord with molded plug
- Weld set -up chart
- Owner’s manual with installation, operation and maintenance guidelines.
| Título | Handler® 125 MIG Welder |
| Procesos | Flux Cored (FCAW) / MIG (GMAW) |
| Sectores de interés | Granja y rancho |
| Material | Mild Steel 24 ga. (0.8 mm) - 3/16 in. (4.8 mm) |
| Metales soldables | Acero inoxidable / acero |
| Input Voltage | 110/115/120 V |
| Fase de entrada | 1-Phase |
| Tipo actual | DC |
| Productos ralentizados | 80 Amps @ 25% ciclo de servicio |
| Max Open Circuit Voltage | 28 VDC |
| Wire Feed Speed | 88 IPM - 545 IPM |
| Diámetro de alambre | Solid Steel 0.024 in. - 0.03 in. Flux Cored 0.03 in. - 0.035 in. Flux Cored 0.8 mm. - 0.9 mm. |
| Soldado | CV |
| Aplicaciones | Proyectos de soldadura |
| Ancho neto | 10 en |
| Altura neta | 13.5 en |
| Duración neta | 19.4 en |
| Peso neto | 57,5 libras |
| Garantía | Garantía de 3 años de Hobart |
| Accesorios | Miller Contacto Consejo: 219.14.000067 Miller Slip Tipo Boquilla: 219.14.169715 Carrito de Arcunion Welder: 219.07.0176 TechniWeld Flux Cored Spool 71T-GS: 219.10.00375 Chemstar Anti-Spatter Spray: 219.09.00700 |
Handler® 125 MIG Welder
A reliable, portable wire feed welder that’s perfect for a variety of projects. Runs on 120V input power, welds up to 3/16 in. mild steel, and is MIG capable with a built-in gas valve.
Features
- Four output voltage settings - Four voltage ranges allow you to adjust the arc for different thicknesses.
- Factory-installed gas solenoid - Easy for you to change from flux-cored wire to MIG welding.
- Built-in contactor - Keeps wire electrically "cold" until trigger is pulled which gives you ease of use.
- Durable feed head with quick-release drive roll tension lever - Positive feed with adjustable tension gives you easy access to thread new wire.
- Spool hub assembly accommodates 4- or 8- inch spools - Offers you flexibility to use small or large spools of wire to better suit your welding needs.
- Self- resetting thermal overload protection - Protects power transformer from thermal overload to provide you maximum reliability.
- Broad output range of 25 – 130 Amps. - Allows you to weld up to 1/8 in. steel with flux-cored wire.
Includes
- Comfortable 8 ft. (2.4 m) H-9D gun with liner for .030-.035 in. (0.8 -0.9 mm) diameter wire.
- Work cable with clamp
- (2) - 0.030 (0.8 mm) contact tips
- Power cord with molded plug
- Weld set -up chart
- Owner’s manual with installation, operation and maintenance guidelines.
| Título | Handler® 125 MIG Welder |
| Procesos | Flux Cored (FCAW) / MIG (GMAW) |
| Sectores de interés | Granja y rancho |
| Material | Mild Steel 24 ga. (0.8 mm) - 3/16 in. (4.8 mm) |
| Metales soldables | Acero inoxidable / acero |
| Input Voltage | 110/115/120 V |
| Fase de entrada | 1-Phase |
| Tipo actual | DC |
| Productos ralentizados | 80 Amps @ 25% ciclo de servicio |
| Max Open Circuit Voltage | 28 VDC |
| Wire Feed Speed | 88 IPM - 545 IPM |
| Diámetro de alambre | Solid Steel 0.024 in. - 0.03 in. Flux Cored 0.03 in. - 0.035 in. Flux Cored 0.8 mm. - 0.9 mm. |
| Soldado | CV |
| Aplicaciones | Proyectos de soldadura |
| Ancho neto | 10 en |
| Altura neta | 13.5 en |
| Duración neta | 19.4 en |
| Peso neto | 57,5 libras |
| Garantía | Garantía de 3 años de Hobart |
| Accesorios | Miller Contacto Consejo: 219.14.000067 Miller Slip Tipo Boquilla: 219.14.169715 Carrito de Arcunion Welder: 219.07.0176 TechniWeld Flux Cored Spool 71T-GS: 219.10.00375 Chemstar Anti-Spatter Spray: 219.09.00700 |
MEJOR JUNTOS
Este artículo iría bien con:
VISTO RECIENTEMENTE
- Al seleccionar una opción se actualiza toda la página.
- Presiona la tecla de espacio y luego las teclas de flecha para seleccionar una opción.