Skip to content
What Are Stick Electrodes?
Welding electrodes are metal wires with baked on chemical coatings. The rod is used to sustain the welding arc and to provide the filler metal required for the joint to be welded. The coating protects the metal from damage, stabilizes the arc, and improves the weld. The diameter of the wire, less the coating, determines the size of the welding rod. This is expressed in fractions of an inch such as 3/32", 1/8", or 5/32." The smaller the diameter means it requires less current and it deposits a smaller amount of filler metal.
Austenitic manganese alloys, producing tough, high-strength deposits that will workharden under impact. Primarily used for joining, repairing or building up manganese steel parts that need to be joined together or joining manganese to carbon steel, including railroad frogs, impact hammers, rotors and rock crusher rolls.
Features
- Unlimited layers with proper preheat, interpass temperatures and procedures
- For building up austenitic manganese steel and cladding carbon steels
- Produces an austenitic manganese deposit that will work harden in service
Typical Applications
- Dragline pins
- Dipper teeth
- Crusher screens and rolls
- Chain hooks
- Hammers Bucket teeth
Welding Positions
-
Flat/Horizontal
These are a pound (1lb) of 14" Mangjet Wearshield Stick Electrodes with 5/32" Diameter
| Manufacturer | Lincoln Electric |
| Item | Stick Welding Electrode |
| Diameter | 5/32" |
| Material | Austenitic Manganese Alloy |
| Length | 14" |
| Container Type | Box |
| Application | Joining Repairing, or Building up Manganese Steel Parts |
What Are Stick Electrodes?
Welding electrodes are metal wires with baked on chemical coatings. The rod is used to sustain the welding arc and to provide the filler metal required for the joint to be welded. The coating protects the metal from damage, stabilizes the arc, and improves the weld. The diameter of the wire, less the coating, determines the size of the welding rod. This is expressed in fractions of an inch such as 3/32", 1/8", or 5/32." The smaller the diameter means it requires less current and it deposits a smaller amount of filler metal.
Austenitic manganese alloys, producing tough, high-strength deposits that will workharden under impact. Primarily used for joining, repairing or building up manganese steel parts that need to be joined together or joining manganese to carbon steel, including railroad frogs, impact hammers, rotors and rock crusher rolls.
Features
- Unlimited layers with proper preheat, interpass temperatures and procedures
- For building up austenitic manganese steel and cladding carbon steels
- Produces an austenitic manganese deposit that will work harden in service
Typical Applications
- Dragline pins
- Dipper teeth
- Crusher screens and rolls
- Chain hooks
- Hammers Bucket teeth
Welding Positions
-
Flat/Horizontal
These are a pound (1lb) of 14" Mangjet Wearshield Stick Electrodes with 5/32" Diameter
| Manufacturer | Lincoln Electric |
| Item | Stick Welding Electrode |
| Diameter | 5/32" |
| Material | Austenitic Manganese Alloy |
| Length | 14" |
| Container Type | Box |
| Application | Joining Repairing, or Building up Manganese Steel Parts |
BETTER TOGETHER
This item would go well with:
RECENTLY VIEWED
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.