Ir directamente al contenido
Save time and money on repairs with 3'' x 6'' Quick Patch®
With Quick Patch repair patch, you simply peel it and seal it. No special tools are needed!
A one-of-a-kind unique product, Quick Patch comes out of the package as pliable as a Band-Aid. Ten minutes later with UV light it transforms into a hard patch that you can sand, paint or drill. The many uses you’ll find for this patch will save you time and money on many of your normally costly equipment repairs and fixes.
Quick Patch can be used on almost any hard surface such as piping, glass, ceramics, concrete, fiberglass, metal, wood, polyethylene and more. When using Quick Patch outdoors the sun cures the patch, indoors you’ll need a UV flashlight. Quick Patch cures rock hard, resistant against many chemicals, solvents and oils, is rot-proof, waterproof and is also impact resistant.
Non-flammable, non-toxic and the adhesive will not harm your skin. Quick Patch is fiberglass reinforced polyester with excellent adhesion properties for long lasting repairs.
Features
- Easy application – just cut, peel and stick.
- Flexible and Waterproof
- Weather and UV Resistant
- Temperature Resistant from -40°C to 200°C
- Extremely durable reinforced polyester/plastic
- Bonds to all hard surfaces except Polypropylene (PP)
- Can be drilled, tapped, sanded and painted in less than an hour.
- No shrinkage or expansion during the application or after curing.
- Fast curing (starting at 5 minutes depending on UV intensity)
- Curing Mechanism: Ultraviolet (UV), Natural or UV Lamp
- Fire rating Class 1
- Dielectric strength 9 kV/mm, Arc resistance > 180 sec., Tracking resistance > 600 V and Insulation resistance 10 to the power of 13 ohms.
| Aplicación | corte, cáscara y palo |
| Características | Flexible e impermeable |
| Resistencia | El tiempo y la resistencia UV |
| Resistencia a la temperatura | -40°C a 200°C |
| Material | poliéster reforzado/plástico |
| Bonos a | todas las superficies duras excepto Polipropileno (PP) |
| Puede ser | perforado, tapado, lijado y pintado en menos de una hora |
| Arrugado | Sin contracción o expansión durante la aplicación o después de curar |
| Tiempo de curación | a partir de 5 minutos dependiendo de la intensidad UV |
| Mecanismo de curación | Ultra Violet (UV), Lámpara natural o UV |
| Clase de clasificación de incendios | 1 |
| Fuerza eléctrica | 9 kV/mm |
| Resistencia al arco | - 180 segundos. |
| Resistencia al rastreo | " 600 V " |
| Resistencia al aislamiento | 10 al poder de 13 ohmios |
| Duración | 6'' ' |
| Width | 3'' ' |
Save time and money on repairs with 3'' x 6'' Quick Patch®
With Quick Patch repair patch, you simply peel it and seal it. No special tools are needed!
A one-of-a-kind unique product, Quick Patch comes out of the package as pliable as a Band-Aid. Ten minutes later with UV light it transforms into a hard patch that you can sand, paint or drill. The many uses you’ll find for this patch will save you time and money on many of your normally costly equipment repairs and fixes.
Quick Patch can be used on almost any hard surface such as piping, glass, ceramics, concrete, fiberglass, metal, wood, polyethylene and more. When using Quick Patch outdoors the sun cures the patch, indoors you’ll need a UV flashlight. Quick Patch cures rock hard, resistant against many chemicals, solvents and oils, is rot-proof, waterproof and is also impact resistant.
Non-flammable, non-toxic and the adhesive will not harm your skin. Quick Patch is fiberglass reinforced polyester with excellent adhesion properties for long lasting repairs.
Features
- Easy application – just cut, peel and stick.
- Flexible and Waterproof
- Weather and UV Resistant
- Temperature Resistant from -40°C to 200°C
- Extremely durable reinforced polyester/plastic
- Bonds to all hard surfaces except Polypropylene (PP)
- Can be drilled, tapped, sanded and painted in less than an hour.
- No shrinkage or expansion during the application or after curing.
- Fast curing (starting at 5 minutes depending on UV intensity)
- Curing Mechanism: Ultraviolet (UV), Natural or UV Lamp
- Fire rating Class 1
- Dielectric strength 9 kV/mm, Arc resistance > 180 sec., Tracking resistance > 600 V and Insulation resistance 10 to the power of 13 ohms.
| Aplicación | corte, cáscara y palo |
| Características | Flexible e impermeable |
| Resistencia | El tiempo y la resistencia UV |
| Resistencia a la temperatura | -40°C a 200°C |
| Material | poliéster reforzado/plástico |
| Bonos a | todas las superficies duras excepto Polipropileno (PP) |
| Puede ser | perforado, tapado, lijado y pintado en menos de una hora |
| Arrugado | Sin contracción o expansión durante la aplicación o después de curar |
| Tiempo de curación | a partir de 5 minutos dependiendo de la intensidad UV |
| Mecanismo de curación | Ultra Violet (UV), Lámpara natural o UV |
| Clase de clasificación de incendios | 1 |
| Fuerza eléctrica | 9 kV/mm |
| Resistencia al arco | - 180 segundos. |
| Resistencia al rastreo | " 600 V " |
| Resistencia al aislamiento | 10 al poder de 13 ohmios |
| Duración | 6'' ' |
| Width | 3'' ' |
VISTO RECIENTEMENTE
- Al seleccionar una opción se actualiza toda la página.
- Presiona la tecla de espacio y luego las teclas de flecha para seleccionar una opción.